
Steel Deck Framing in Denver
Steel beams and joists give a deck a frame that resists rot and pests and spans longer distances with fewer supports underneath. Here is where steel earns its higher cost, how we build with it and what it asks of you.
- FrameSteel beams and joists
- Best forLarge, high or heavily loaded decks
- Trade-offGenerally costs more than pressure-treated wood
- UpkeepRegular inspections and rust-resistant coatings
- PropertiesResidential and commercial
What steel changes in a deck frame
A deck is built in layers: footings and posts, then beams, then joists, then the boards you walk on. On a steel-framed deck the beams and joists are steel, and the structure behaves differently as a result.
Steel resists rot, insects and decay. Wood swells as it takes on moisture and shrinks as it dries, and that cycle can warp, check or split it. Steel framing minimizes movement and keeps the deck surface straighter over time, which suits a place with heavy snow and wide temperature swings.
Steel is also strong for its weight and can span longer distances without intermediate supports. On a large deck, that can mean fewer posts standing in the yard or on the patio below. If you are still weighing materials, our deck framing page covers the pressure-treated wood side in more detail.




Steel or pressure-treated wood
Neither material is right for every deck. The choice turns on the deck's size and height, what it has to carry, your budget and how much upkeep you will accept.
- The deck is large, or high off the groundPrice steel. Wood may not suit large or high decks.
- The deck has to carry a heavy load, such as a hot tubConsider steel. Heavy loads are one of the conditions where wood framing may fall short.
Read more - You would rather not stain or paint the frameSteel needs very little maintenance. A wood frame needs regular upkeep such as staining or painting.
- The deck is modest in size and budget leads the decisionPressure-treated wood costs less, is easy to work with and is treated to resist rot and insect damage.
Deck Framing


How we build a steel-framed deck
The sequence follows the same logic as any deck we build. What changes is the frame, and the tools and techniques steel takes.
Planning and design
We draw the deck with you: its size, shape and layout, where doors open onto it, and where railings and stairs go. Materials and budget are part of that conversation. We confirm your jurisdiction, prepare drawings, submit the permit and coordinate inspections.
Site preparation
The area is cleared and leveled, and the foundations or footings go in.
Frame assembly
Steel beams are fastened to each other and to the foundation, then the joists go in. We check spacing and alignment as we go, so the finished frame is level and straight.
Decking and finishing elements
With the frame complete, we install the decking you chose, then railings, stairs, lighting and other features. A final inspection, a complete clean-up of the site and a walkthrough with you close out the project.
What steel asks of you
Steel's advantages come with trade-offs. Weigh them before you decide.
A higher price
Steel framing is generally more expensive than pressure-treated wood, so it makes the most sense on decks that need its strength and span.
Specialized tools and techniques
Steel isn't cut and fastened like lumber. It takes a builder equipped and practiced to frame with it.
Protection from rust
Steel can rust if it isn't properly protected. Rust-resistant coatings and regular inspections keep the frame in good condition, so plan to look it over from time to time.
What goes on top of a steel frame
The frame carries the deck, but the decking, railings and stairs are what you see and touch every day. You choose them during design, whether that means composite decking, Trex or wood. For more on how steel handles a Colorado winter, read the hidden benefits of steel deck framing for Colorado winters.
Questions homeowners ask
Does a steel deck frame rust?
It can if it isn't protected. A steel frame depends on its rust-resistant coating, and regular inspections are how you keep it in good condition.
Is steel framing worth the extra cost on a smaller deck?
Not always. Pressure-treated wood costs less and is easy to work with. Steel pays off where wood struggles: large or high decks, heavy loads and severe weather.
Can you replace my old deck with a steel-framed one?
Yes. We build new decks and replace old ones, including in the same footprint, and steel framing is an option for either.
Do I need a permit for a steel-framed deck?
Permit rules depend on where you live. In Parker, permits are required for all decks regardless of height or size. We confirm your jurisdiction, prepare drawings, submit the permit and coordinate inspections.
Can you build steel deck framing for a business?
Yes. We build steel deck framing for residential and commercial properties.
See it built
Featured projects where you can see this work in place. Browse featured projects

Covered upper deck; Railing with diamond accents; Spiral staircase; Golf course view.
Related services and guides
Most decks combine several of these. We design and build them together.
Compare steel and wood for your deck
In a free consultation we'll look at your deck's size, height and load, and give you a detailed estimate for the frame that fits.
Call(720) 273-2527 [email protected]“We were never out of the loop, and always knew what to expect.”